1/2 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.01 - rev.d 2sd1980 (3) emitter (2) collector (1) base rohm : cpt3 eiaj : sc-63 6.5 2.3 (2) (3) 0.65 0.9 (1) 0.75 2.3 0.9 5.1 1.5 5.5 2.3 0.5 1.0 0.5 9.5 2.5 0.8min. 1.5 power transistor (100v, 2a) 2sd1980 ? features ? dimensions (unit : mm) 1) darlington connection for high dc current gain. 2) built-in resistor between base and emitter. 3) built-in damper diode. 4) complements the 2sb1316. ? inner circuit r 1 3.5k r 2 300 b c e c b e : base : collector : emitter r 1 r 2 ? absolute maximum ratings (ta=25 c) collector-base voltage collector-emitter voltage emitter-base voltage collector current collector power dissipation junction temperature storage temperature ? 1 single pulse pw = 100ms parameter symbol vcbo vceo vebo ic pc tj tstg limits 100 100 6 2 1 10 150 ? 55 to + 150 unit v v v a(dc) 3 a(pulse) w w(tc = 25 c) c c ? 1 ? packaging specifications and h fe package code basic ordering unit (pieces) marking denotes h fe ? type h fe 2sd1980 cpt3 1k to 10k 2500 tl ? ? electrical characteristics (ta=25 c) collector-base breakdown voltage collector-emitter breakdown voltage collector cutoff current emitter cutoff current output capacitance collector-emitter saturation voltag dc current transfer ratio measured using pulse current. ? parameter symbol min. typ. max. unit conditions bv cbo bv cbo bv ebo i cbo i ebo cob 100 100 ? ? ? ? ? ? ? ? 25 80 ? ? 10 3 ? ? v v ?? v a ma pf i c = 50 a i c = 5ma i e = 5ma v cb = 100v v eb = 5v v ce(sat) v be(sat) ?? ?? 1.5 v 2.0 v i c = 1a , i b = 1ma i c /i b = 1a/1ma h fe 1000 ? 10000 ? v ce = 2v , i c = 1a v ce = 5v , i e = ? 0.1a , f = 30mhz v cb = 10v , i e = 0a , f = 1mhz ? ? emitter-base breakdown voltage base-emitter saturation voltage transition frequency 6 f t mhz
2/2 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.01 - rev.d data sheet 2sd1980 ? electrical characteristic curves 2.0 collector current : i c ( a) 5 234 1 0 1.2 1.6 0.4 0.8 0 collector to emitter voltage : v ce ( v) fig.1 grounded emitter output characteristics ta=25 c 1ma i b =0.3ma 0.4ma 0.5ma 0.6ma 0.7ma 0.8ma 0.9ma collector current : i c ( a) 2.6 3.0 1.4 1.0 1.8 2.2 0.6 0.2 0.01 0.02 0.05 0.1 0.2 0.5 10 1 2 5 base to emitter voltage : v be ( v) fig.2 grounded emitter propagation characteristics v ce =2v ta=100 c 25 c ? 25 c dc current gain : h fe 10 1 0.1 0.01 0.001 50 100 200 500 1000 2000 5000 10000 20 10 collector current : i c ( a) fig.3 dc current gain vs. collector current ta=25 c v ce =4v 2v v ce =2v ta=100 c 25 c ? 25 c dc current gain : h fe 0.001 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 10 20 50 100 200 500 1000 2000 5000 10000 collector current : i c ( a) fig.4 dc current gain vs. collector current 100 20 10 1 0.1 0.2 0.5 2 5 50 0.0.1 0.0.2 0.0.5 0.1 0.2 0.5 1 2 5 10 collector current : ic (a) fig.5 collector-emitter saturation voltage vs.collector current ta=25 c i c /i b =1000 500 collector saturation voltage : v ce(sat) (v) 100 20 10 1 0.1 0.2 0.5 2 5 50 0.0.1 0.0.2 0.0.5 0.1 0.2 0.5 1 2 5 10 collector current : ic (a) fig.6 collector-emitter saturation voltage vs.collector current i c /i b =1000 ta= ? 25 c 100 c 25 c collector saturation voltage : v ce(sat) (v) 1000 200 100 10 1 2 5 20 50 500 0.1 0.2 0.5 1 2 5 10 20 50 100 collector to base voltage : v cb (v) fig.7 collector output capacitance vs. collector-base voltage collector output capacitance : cob (pf) ta=25 c f=1mhz i e =0a
r1120a www.rohm.com ? 2012 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specified herein is subject to change for improvement without notice. the content specified herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specifications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when design ing circuits for mass production. great care was taken in ensuring the accuracy of the information specified in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the produc ts. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specified in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any product, such as derating, redundancy, fire control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specified herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
